Skip to main content

10 Units Cummins 4B Series Diesel Generator Set Ready Shipped 

Cummins Diesel Generator Set Powered By Cummins 4B series engine with Stamford Alternator.



The Cummins B Series is a family of diesel engines produced by American manufacturer Cummins. In production since 1984, the B series engine family is intended for multiple applications on and off-highway, light-duty, and medium-duty. In the automotive segment, it is best known for its use in Dodge/Ram pickup trucks.
                
Since its introduction, three generations of the B series engine have been produced, offered in both inline-four and inline-six configurations in multiple displacements.

The B-series features engine bores machined directly into the block (rather than the wet liners used on earlier Cummins engines). It was also set apart by the use of a shallow one-piece head, requiring closer tolerances than in other Cummins products. The engine was first manufactured in Rocky Mount, North Carolina, and other plants were later added in Mexico, Turkey, and Darlington, UK.
Every Cummins powered Dodge Pickup (since initial production in 1989) has come equipped with a turbocharger. It uses a gear-drive camshaft for extra reliability. Also specified is a deep-skirt engine block and extra-strong connecting rods. A Holset turbocharger is used. The original B Series was updated with 24 valves and an electronic engine management system to become the ISB in 1998.

The B-series features engine bores machined directly into the block (rather than the wet liners used on earlier Cummins engines). It was also set apart by the use of a shallow one-piece head, requiring closer tolerances than in other Cummins products.  The engine was first manufactured in Rocky Mount, North Carolina, and other plants were later added in Mexico, Turkey, and Darlington, UK.

Every Cummins powered Dodge Pickup (since initial production in 1989) has come equipped with a turbocharger. It uses a gear-drive camshaft for extra reliability. Also specified is a deep-skirt engine block and extra-strong connecting rods. A Holset turbocharger is used. The original B Series was updated with 24 valves and an electronic engine management system to become the ISB in 1998.

Contact us for more information about this generator set.




Comments

Post a Comment

Popular posts from this blog

Mitsubishi S4S-DT Japan engine surplus new engine instock| Industrial En...

Mitsubishi S4S-DT Japan engine surplus new engine instock| Industrial Engine Stockist shipping, fit many equipments
Post a Comment
Read more

403d-07 Perkins surplus new engine |Hiersun Power | unused madein Japan ...

Perkins 403D-07 new surplus new engine GH built list Hiersun Power| Huge stock of Perkins engines
Post a Comment
Read more

Every emission challenge requires engine exhaust gas re circulation

  Exhaust Gas Re circulation   is one of the technologies that can be utilized to reduce NOx (nitrogen oxides) (hereafter referred to as "EGR"). EGR reduces NOx emissions by lowering the combustion temperature by reducing the amount of oxygen in the cylinder, which is an efficient procedure for reducing NOx.   EGR (Exhaust Gas Re-circulation ) is a technology that reduces NOx emissions from engines. A portion of the air is replaced by carbon dioxide when exhaust gases are recirculated into the engine cylinders. The reduced amount of oxygen in this process lowers the combustion temperature, which minimizes the amount of nitrogen oxides produced. Exhaust gases can either be cooled outside and routed into the intake manifold, or they can be regulated internally through the camshaft. EGR advantage EGR is a highly effective method of lowering NOx levels. EGR has a low influence on the engine package or packaging and is a proven technology for on-road and off-road applications....
Post a Comment
Read more